Power Cube® 4E+ Soca Power Cube®Power Distribution SKU# 22721
The A/C Power is supplied to the Power Cube® 4E+ through a 20-Amp powerCON® inlet connector, directly wired to a 20-Amp powerCON® outlet. This permits multiple Power Cubes® to be connected end to end on a single circuit.
On each of the open ends of the extruded housing is an Edison 15-amp Duplex Receptacle with its own dedicated 10-Amp supplementary circuit interrupter (Breaker) and power indicator lamp. Each duplex receptacle has a total maximum load of 8-Amps.
All powerCON® inlets and outlets are parallel connected supporting a combined maximum electrical load of 12-16 Amps depending on the rating of the power supply cord connected. For desired ergonomic connectivity the 4E+ is available in right- or left-hand versions.
Right Hand Version (not shown) SKU# 22821
Technical Specs
- Inputs: 1x Neutrik® 20-Amp powerCON®
- Outputs 1x 20-Amp Neutrik® powerCON®, 2x 20-Amp Hubbell® Edison U-Ground Duplex Receptacle
- Neutrik® Connectors above, are not approved for disconnecting under load
Electrical Specs
- Total maximum load of 16-Amps, 120 V, 60hz
- Electrically approved by special inspection for North America
- Fly-Track Rating: 500 lbs / 226.8 kg, straight pull w/single stud fly-clip
- Dimensions: (LWH) 5.5” x 5.5” x 2.1”, 39.75 mm x 139.75mm x 53.44mm
- Weight: 2lb 5.6oz / 1.07kg
Features
- Virtually indestructible
- extruded aluminum body
- Integrated Fly-Track
- Can be wired as a Stringer (in series)
- Available in right or left hand versions
Limited 1 year Manufacturer Warranty
Your Dynamic Snippet will be displayed here...
This message is displayed because youy did not provide both a filter and a template to use.
