PCD 338-SThis is a 2U, 19" rack mount PowerCon® Three Phase Power Distribution Unit. The '-S' represents a Female SOCA connector, parallel connected to the six front panel PowerCon® connectors to connect to a Power Cube® PC6 for remote connectivity of the PowerCon® connections. All components are mounted on the front panel so the unit can be mounted behind other equipment in a rack and not have cables interfere or require access to the back of the unit. It uses a NEMA L-21-30 inlet connector that feeds Six (6) 20 Amp Switch Breakers, each of which are connected to a PowerCon® outlet on the front panel. Unlike the single Phase PCD units, the Three Phase unit front panel does not have a convenience Edison duplex outlet like the PCD-238-S.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.