Gear Box Pro Slim Line (SL) Series

Gear Box Pro SLP Series are 2U - 19 rack mount, 3-5/8” deep, high voltage power distribution products. Mounting these units on the rear rack rails behind equipment in the rack saves premium (front) vertical rack space. All SLS Series Products use Torque (Veam style) multi-pin connectors and genuine Neutrik connectors.  

SL Series:
Welcome to the Gear Box Pro Ltd. Audio and Power Slim Line family of products. The Gear Box Pro SLP Series is a 2U rack mountable high voltage power distribution product. The model # represents four attributes of the product. SL is an acronym for Slim Line because the metal enclosure is only 3.5” deep. Mounting on rear rack rails behind equipment in the rack saves premium (front) vertical rack space. All SLS Series Products use Torque (Veam style) multi-pin connectors and genuine Neutrik connectors.

SLP Series:
Within SLP, the P represents power and within the numeric part of the model number the first numeric digit represents the phase (2 = single phase / 3 = three phase) and the next two numeric digits are simply successive product number identifiers.

SLP-231

The SLP-231 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector with a paralleled Outlet (pass through) connector for daisy connectivity of racks. There are two 20 Amp electrical circuit breakers on the front panel, each of which are connected to one of the two ( X & Y ) phases of the main power inlet connector. Each circuit breaker is connected to a pair of T-slot U-ground duplex receptacle outlets located on the rear panel. The same two independent circuit breakers distribute power from each phase of the inlet connector to each half of the split T-slot duplex convenience outlet on the front panel.

SLP-232
The SLP-232 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector. There are two 20 Amp electrical circuits connected to each of the two ( X & Y ) phases of the main power inlet connector. Each of the four circuit breakers supply a T-slot U-ground duplex receptacle located on the rear panel. Two of the four independent circuit breakers distribute power from each phase of the inlet connector to each half of the split T-slot duplex convenience outlet on the front panel.

SLP-233
The SLP-233 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector. There are four 20 Amp circuit breakers on the front panel. All four of these circuits are available on the top of the box and parallel connected two t-slot duplex receptacles on the bottom of the box for a total of four circuits accessible on both top and bottom of the box. The rear panel has no outlets but a convenient label is provided for easy identification when viewing the rear panel. Two of the four independent circuit breakers distribute power, one from each phase of the inlet connector to each half of the split T-slot duplex convenience outlet on the front panel.

SLP-234
The SLP-234 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector. There are two 20 Amp electrical circuit breakers on the front panel each of which are connected to one of the two ( X & Y ) phases of the main power inlet connector. Each breaker independently distributes power to a T-slot duplex U-ground receptacle on the rear panel which is also parallel connected to one half of the split T-slot duplex U-ground convenience receptacle located on the front panel. In addition there are two NEMA L5-30 single twist-lock outlet connectors located on the rear panel, each of which are independently connected directly to each ( X & Y ) phase of the L15-30 Main Inlet connector.

SLP-235
The SLP-235 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector. There are four 20 Amp electrical circuit breakers on the front panel, two of these breakers are connected to the ‘X’ phase and two to the ‘Y’ phase of the main power inlet connector. Each breaker independently distributes power to each half of a pair of split T-slot duplex U-ground receptacle for a total of four independent circuits or outlets on the rear panel. The X2 and Y2 breakers also distribute power, one to each half of the split T-slot duplex U-ground convenience receptacle located on the front panel. In addition there are two NEMA L5-30 single twist-lock outlet connectors located on the rear panel, each of which are independently connected directly to each ( X & Y ) phase of the L15-30 Main Inlet connector.

SLP-236
The SLP-236 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector. There is one double 15 Amp breaker and two single 20 Amp breakers located on the front panel. The double 15 Amp breaker distribute power to a duplex 220 Volt 15 Amp twist lock connector that is also connected to a split T-slot duplex U-ground receptacle. Both outlets connected to this double 15 Amp breaker are located on the rear panel. Each of the remaining two 20 Amp single breakers are connected to one of the two phases ( X & Y ) of the main power inlet connector and distribute power to a T-slot duplex U-ground receptacle located on the rear panel. The same two 20 Amp X2 and Y2 breakers also distribute power, one to each half of the split T-slot duplex U-ground convenience receptacle located on the front panel.

SLP-237
The SLP-237 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector. There are two double 15 amp breakers and two single 20 Amp breakers located on the front panel. Both of the double 15 Amp breakers independently supply power to duplex twist-lock outlets located on the rear panel. Each of the remaining two 20 Amp single breakers are connected to one of the two ( X & Y ) phases of the main power inlet connector and distribute power to T-slot duplex U-ground receptacles located on the rear panel. The same two 20 Amp breakers supply power to one half of a split T-slot duplex U-ground convenience receptacle located on the front panel. This unit provides independent circuit protection for dual power supplies used on professional touring mixing consoles.

SLP-238
The SLP-238 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L15-30 for a Main Inlet connector. There are six independent 20 amp breakers located on the front panel. Each of the X1, X2, Y1 & Y2 breakers distribute power to four T-slot duplex U-ground receptacles located on the rear panel. The remaining X3 & Y3 breakers distribute power to a split T-slot duplex U-ground convenience receptacle located on the front panel.

SLP-MP2
The SLP-MP2 is a 2U high 19" rack mount Motor Power Distribution unit for two chain motors. This unit uses a NEMA L21-30 (208 Volt 30 amp three phase) power inlet connector. There is a convenient phase reverse switch that globally affects the two independent 3 Pole breakers that distribute power to each of the two 9 pin Female Chassis SOCA motor connectors. Each Motor SOCA output is connected to a 3 Pin Female XLR connector for the remote motor controller. The rear panel is blank, allowing the unit to be racked behind other equipment without creating obstructions. This unit is very useful for speaker line arrays or smaller lighting trusses on A/V presentations when a 6 or 8 channel motor controller is more than required. Loading one in each amp rack is a convenient packaging solution for truss and speakers, stage left and stage right.

SLP-335
The SLP-335 is a 2U high 19" rack mount (220 Volt 30 amp three phase) power distribution bar. This model has a NEMA L21-30 for a Main Inlet connector. There are four 20 Amp independent circuit breakers on the front panel, each of which are connected to one of the three phases ( X, Y & Z ) of the main power inlet connector. The X2 & Y2 Phase breakers distribute power to a split T-slot duplex U-ground receptacle located on the rear panel and Y1 & Z1 distribute power to a split T-slot duplex U-ground receptacle located on the rear panel which is also parallel connected to a split T-slot duplex U-ground convenience receptacle located on the front panel. In addition there are three NEMA L5-30 single twist-lock 120 Volt, 30 Amp outlet connectors located on the rear panel. Each of these are directly connected to one of the three ( X, Y & Z ) phases of the L21-30 Main Inlet connector.

SLP-338
The SLP-338 is a 2U high 19" rack mount (220 Volt, 30 Amp, three phase) power distribution bar. This model has a NEMA L21-30 for a Main Inlet connector. There are six independent 20 amp breakers located on the front panel. Each of the X1 & Y1 breakers distribute power to a T-slot duplex U-ground receptacle located on the rear panel. In addition, the X2 & Y2 breakers distribute power to a split T-slot duplex U-ground receptacle located on the rear panel which is also parallel connected to a split T-slot duplex U-ground convenience receptacle located on the front panel. The remaining two 20 Amp breakers, Z1 & Z2, on the third phase, distribute power to a split T-slot duplex U-ground receptacle located on the rear panel.

SLS-2
The SLS-2 is a speaker cable splitter/combiner patch panel, primarily for installation amplifier racks. Using Neutrik speaker cable jumpers, the amplifier outputs conveniently patch into the front panel. The outputs on the rear panel then combine channels 1 & 2 into a single NL4 connector providing a Bi-amp output marked 1-2. This is repeated for channels A 3-4, B 1-2 and B 3-4. Each of these Bi-amp NL4 outputs are then combined together in their respective A & B groupings, into a single NL8 connector that can be used to feed an 8 conductor cable with an NL8FC connector allowing flexible patching of 4 full range or two Bi-amp NL4 output connectors in a stage box, by moving a single NL8 connection. An amplifier rack that has four 2 channel amplifiers with Bi-amp NL4 connector outputs when patched into the rear panel, provide all 8 full range amp channels on the front panel.

An alternative use of the SLS-2 is to take an NL8 patch cable from a four channel amplifier that uses an NL8 connector for its output and patch it into one of the SLS-2 rear panel NL8 connectors which then split or fan out into four separate NL4 connectors (Pin 1+ & 1- only) on the front panel for full range speaker cable connectivity.

SLS-4 & 4D


The SLS-4 & 4D are a speaker cable splitter/combiner patch panels for portable and installation amplifier racks. The SLS-4 is essentially an SLS-2 with the connectors placed on the opposite sides or panels of the enclosure. Using Neutrik speaker cable jumpers, the amplifier outputs conveniently patch into the rear panel. The output or front panel then combines channels 1 & 2 into a single NL4 connector providing a Bi-amp output marked 1-2. This is repeated for channels A 3-4, B 1-2 and B 3-4. Each of these Bi-amp NL4 outputs are then combined together in their respective A & B groupings, into a single NL8 connector that can be used to feed an 8 conductor cable with an NL8FC connector allowing flexible patching of 4 full range or two Bi-amp NL4 output connectors in a stage box, by moving a single NL8 connection. The SLS-4D has a parallel connected NL8 that enables the user to patch a second Stage Box NL8FC cable connection into the same amplifier outputs.

SLS-3
The SLS-3 is a speaker cable splitter/combiner patch panel, primarily for installation amplifier racks. The SLS-3 is essentially three Cable Cube DISTRO/MATRIX units in a 2U rack mount panel. Using Neutrik speaker cable jumpers, the amplifier outputs conveniently patch into the front panel. The output or rear panel then combines channels A1 & A2 into a single NL4 connector providing a Bi-amp output marked 1-2. This is repeated for channels A 3-4, B 1-2, B 3-4 C 1-2 & C 3-4. Each of these Bi-amp NL4 outputs are then combined together in their respective A,B & C groupings, into a single NL8 connector that can be used to feed an 8 conductor cable with an NL8FC connector allowing flexible patching of 4 full range or two Bi-amp NL4 output connectors in a stage box, by moving a single NL8 connection. An alternative use of the SLS-3 is to take an NL8 patch cable from a four channel amplifier that has an NL8 output and patch it into one of the rear panel NL8 connectors that fan out into four separate NL4 connectors (Pin 1+ & 1- only) for 4 full range speakers within each group.

SLS-6 & 6D
The SLS-6 is a speaker cable splitter/combiner patch panel for portable and installation amplifier racks. The SLS-6 is an SLS-3 with the connectors placed on the opposite sides or panels of the enclosure. The SLS-6 is essentially three Cable Cube DISTRO/MATRIX units in a 2U rack mount panel. Using Neutrik speaker cable jumpers, the amplifier outputs conveniently patch into the rear panel. The output or front panel then combines channels A1 & A2 into a single NL4 connector providing a Bi-amp output marked 1-2. This is repeated for channels A 3-4, B 1-2, B 3-4 C 1-2 & C 3-4. Each of these Bi-amp NL4 outputs are then combined together in their respective A,B & C groupings, into a single NL8 connector that can be used to feed an 8 conductor cable with an NL8FC connector allowing flexible patching of 4 full range or two Bi-amp NL4 output connectors in a stage box, by moving a single NL8 connection. The SLS-6D has a parallel connected NL8 that enables the user to patch a second Stage Box NL8FC cable connection into the same amplifier outputs.

An alternative use of the SLS-6 is to take an NL8 patch cable from a four channel amplifier that has an NL8 output and patch it into one of the front panel NL8 connectors that fan out into four separate NL4 connectors, (Pin 1+ & 1- only) for 4 full range speakers for each group.

Note:
All Gear Box Pro power products are electrically certified by special inspection for use in North America. All Gear Box Products have a limited warrantee on all materials components and workmanship for one year from the date of purchase. If you do not find an audio or power distribution product in our line up that will suit your application, please feel free to contact us to discuss how we may accommodate your specific requirements. Our consultative sales staff look forward to serving you. Note that within each of the SL Series grouping of products you may mix and match quantities to reach quantity discount pricing columns with the exception of custom products that will be evaluated on an individual and order quantity basis.

Gear Box Pro SLP Series are 2U - 19 rack mount, 3-5/8” deep, high voltage power distribution products. Mounting these units on the rear rack rails behind equipment in the rack saves premium (front) vertical rack space. All SLS Series Products use Torque (Veam style) multi-pin connectors and genuine Neutrik connectors. Rackmount products for professionals.