The TWIN is a simple NL2/combo connector splitter. Three (3) NL2/combo connector’s parallel connected together
Qty
More info ››
This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the contact pins on an NL2/combo connector and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the contact pins of a second NL2/combo connector.
This has the same wiring as a DISTRO that uses all NL4’s.~Applications: This enables two (2) full range speakers to be connected to a single four conductor speaker cable (combining two speaker cables into one).
Qty
More info ››
The COMBO II adaptor box (similar to the Distro) breaks out an NL8 into four (4) NL2/combo connectors. Each of the NL2/combo connector contacts are connected to each of the four (4) contact pairs on the NL8 connector.
Features: The convenience of this adaptor box over the Distro is the flexibility of using NL4, NL2 or the traditional ¼” speaker cables to hook up your full range speaker cabinets.
Qty
More info ››
The COMBO + is the similar to the COMBO II with the addition of a parallel connected NL8 providing pass through or daisy connectivity to continue on with an NL8 cable.
Qty
More info ››
The COMBO/DISTRO has an NL4 that sends Pin 1+,1- to Pin 1+,1- on an NL4 and a parallel connected NL2/Combo connector. Then Pin 2+,2- is sent to Pin 1+,1- on an NL4 and a parallel connected NL2/Combo connector. Essentially a “Y” connection to each set of contacts on an NL4 connector.
Qty
More info ››
A COMBO / MATRIX is equivalent to two COMBO’s in a single box, each of which are connected to one half of an NL8 connector.
Applications: If nothing is connected to the NL8 you could use the Expander / Distro as two independent Combos.
Qty
More info ››
The QUAD is a simple NL4 ‘Y’ Splitter. Three (3) NL4’s parallel connected together. Applications: Primarily used for splitting an NL4 cable (paralleling Bi-amplified speakers).
Qty
More info ››
This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
Qty
More info ››
The Distro is an adaptor box that breaks-out an NL8 into four (4) NL4’s. Each of the NL8 contact pairs connect to only Pin 1+, 1- of each of the four (4) NL4 connectors. This means that only full range speakers using pins 1+ and 1- can effectively connect to the NL4’s.
Qty
More info ››
The Distro + is the same as the Distro with the addition of a parallel connected NL8 providing pass through or daisy connectivity to continue on with an NL8 cable.
Qty
More info ››
A DISTRO / MATRIX is equivalent to a pair of DISTRO’s in the same box, each of which are connected to one half of an NL8 connector. If nothing is connected to the NL8 you could use the DISTRO / MATRIX as two independent DISTRO’s.
Qty
More info ››
The OCTOPUS is a simple NL8 ‘Y’ Splitter. Three (3) NL8’s parallel connected together.
Qty
More info ››
The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.
Qty
More info ››
The MATRIX II is an NL8 break out to a pair of parallel connected NL4’s. Each half of the NL8 has a parallel connected pair of NL4’s. This has the same pin wiring as a MATRIX with the convenience of an additional, second NL4 parallel connected to each of the NL4’s of a standard MATRIX.
Qty
More info ››
The Matrix + is the same as the Matrix with the addition of a parallel connected NL8 providing pass through or daisy connectivity to continue on with an NL8 cable.
Qty
More info ››
The DISTRO + / MATRIX + contains a DISTRO + with the addition of connections to Pins 2+ & 2- on the first two NL4’s providing a matrix for two Bi-amp outputs from the NL8. The two NL4’s that are wired as a MATRIX have their Pin 1+, 1- connected to Pins 1 and 3 already to provide 4 full range speaker taps off of an NL8 cable. Therefore, the two NL4’s on the output side have their Pin 1+, 1- connected to pin 2 & Pin 4 of the NL8 connectors to complete the 4 DISTRO outputs.
Qty
More info ››
The RMK-2 is a convenient rack mount kit that raises the value of Cable Cube inventory. The RMK transforms them into a flexible, convertible amplifier rack patch panel. Depending on the direction a Cable Cube is loaded into the RMK, it will split or combine amplifier outputs. The RMK-2 accepts the following Cable Cube Profiles: OCTO, COMBO/MATRIX, DISTRO/MATRIX and the MATRIX+. The Cable Cube System of reversible modules & related RMK’s provide even greater flexibility in speaker cabling design.
Qty
More info ››
The RMK-4 is a convenient rack mount kit that raises the value of Cable Cube inventory. The RMK transforms them into a flexible, convertible amplifier rack patch panel. Depending on the direction a Cable Cube is loaded into the RMK, it will split or combine amplifier outputs. The RMK-4 accepts the following Cable Cube Profiles: TWIN, COMBO, QUAD, DISTRO and MATRIX. The Cable Cube System of reversible modules & related RMK’s provide even greater flexibility in speaker cabling design.
Qty
More info ››
