p {font-size:10px}
Power-Cube®

Power Box A/C Power Splitter

Gear Box Pro’s latest generation of 20 amp power distribution solutions. Designed for the most demanding applications in the entertainment industry, the Power Cube® products are built with genuine Neutrik® PowerCON and Hubbell® Edison style power components. The custom aluminum extruded exoskeleton incorporates a convenient integrated fly-track for standard rigging clips. This makes Power Cube® products the most durable and versatile quad power boxes on the market and a must have for the discerning professional.

Applications

Staging

Backline instruments

Audio

Powered Floor Monitor, Speakers, Powered Loudspeakers, Line Array Speaker Systems

Lighting

Overhead Truss, Video Projectors, Moving Head Fixtures, LED Lighting

Users

Concert Production, A/V Rentals Convention, Centers Houses Of Worship, Theatres and Broadcast

Construction / Design Goals

Our custom aluminum extrusion is the exoskeleton of the Power Cube® delivering the durability demanded by the entertainment industry. Our road case friendly packaging design limits potential physical damage by recessing the electrical components into both ends of the extruded housing. NO MORE GAFF TAPE! Power Cube® products are designed with an integrated fly-track allowing the user to position power where required and secure the device with standard rigging clips to speaker rigging, lighting pipes or truss. This not only improves public safety but also improves your show production assembly time. Designed to improve the visual presentation of your show production, all cables enter and exit the device axially, providing a very flat and discrete stage- cabling layout. Power Cube® is designed to eradicate technical spiders (visually unappealing trip hazards) from your professional stage! With detachable custom power cable lengths, messy cable coils are minimized.

Gear Box Pro reserves the right to change the technical specifications without notice.

*To purchase Power Cube® products, view our Dealer List for your local area or buy direct from this site.

Head Office: 12478 Fifth Line, Limehouse, ON. L0P 1H0 Canada PH: (905) 702-8664 FX: (905) 877-7792 US Warehouse: 5055 Enterprise Blvd. Toledo, OH, 43612 USA Toll Free: 877-789-5774

Sort By:
Power Cube® 4E (Left ) (SKU: 22720)Power Cube® 4E (Left ) (SKU: 22720)The Power Cube 4E model is a passive A/C Splitter device, containing no active components or supplementary circuit interrupter (breaker) devices. A/C is supplied to the Power Cube 4E through a 20-Amp PowerCON inlet connector, directly wired to a 20-Amp PowerCON NAC3MPB outlet. This permits multiple Power Cubes to be connected end to end on a single circuit. All PowerCON inlets and outlets are parallel connected supporting a combined maximum electrical load of 12-16 amps.
Power Cube® 4-E+ (SKU: 22721)Power Cube® 4-E+ (SKU: 22721)A/C is supplied to the Power Cube® 4E+ through a 20-Amp PowerCON inlet connector, directly wired to a 20-Amp PowerCON outlet. This permits multiple Power Cubes® to be connected end to end on a single circuit. On each of the open ends of the extruded housing is an Edison 15-amp Duplex Receptacle with its own dedicated 10-Amp supplementary circuit interrupter (Breaker) and power indicator lamp. Each duplex receptacle has a total maximum load of 8-Amps. All PowerCON inlets and outlets are parallel connected supporting a comined maximum electrical load of 12-16 Amps depending on the rating of the power supply cord connected.  For desired ergonomic connectivity the 4E+ is available in right or left hand versions.
Power Cube® 4-ES (SKU: 22722)Power Cube® 4-ES (SKU: 22722)A/C is supplied to the Power Cube® 4ES through a 20-Amp PowerCON inlet connector, directly wired to a 20-Amp PowerCON outlet. This permits multiple Power Cubes® to be connected end to end on a single circuit. Both the inlet and outlet PowerCON connectors are recessed into the middle of the Fly-track on each side of the box. This places the receptacles at 90 degrees to the PowerCON inlet and outlet. On each of the open ends of the extruded housing is an Edison 15-amp Duplex Receptacle.
Power Cube® PC-6 (SKU: 22620 -120V SOCA to PowerCON Splitter-SKU 23630 240V)Power Cube® PC-6 (SKU: 22620 -120V SOCA to PowerCON Splitter-SKU 23630 240V)POWER CUBE® PC-6 (120 Volt X 6 Circuits of 20A) – Male SOCA to PowerCON Splitter
 
This SOCA to PowerCON Splitter can be used in the air, on or under staging for lighting or powered loudspeakers! Imbedded into each side of the solid, one piece, aluminum extrusion, are three PowerCON NAC3MPB-1 outlet connectors.  Each PowerCON is connected to its own independent circuit on the SOCA style Connector for a total of six (6) 20 amp circuits.  As a safety feature there is a Fly-Track, opposite and on axis to the SOCA connector, to properly suspend (Rig) the PC-6.  On each side of the SOCA there are Fly-Track points as a safety to secure the SOCA cable.
This is probably the most compact and elegant piece of hardware most Tech’s have seen in some time. 
Power Cube® PCH-2 (SKU: 22825)Power Cube® PCH-2 (SKU: 22825) PCH-2
 
This is a basic passive 220V 16A PowerCon splitter with an NAC3MPA-1 inlet connector split out to two (2) NAC3MPB-1 outlet connectors.
There is a parallel connected green neon power indicator lamp in between the two outlet connectors.
Power Cube® PCH-6 (SKU: 23630 - 120V SOCA to PowerCON Splitter-SKU 22620 208-240V)Power Cube® PCH-6 (SKU: 23630 - 120V SOCA to PowerCON Splitter-SKU 22620  208-240V)SPECIAL ORDER -- The NEW POWER CUBE® PCH-6 (208 – 240 Volt X 6 Circuits of 20A) – Male SOCA to PowerCON Splitter

This is the ULTIMATE Touring, SOCA to PowerCON Splitter! Imbedded into each side of the solid, one piece, aluminum extrusion, are three PowerCON NAC3MPB-1 outlet connectors. Each PowerCON is connected to its own independent circuit on the SOCA style Connector for a total of six (6) 20 amp circuits. As a safety feature there is a Fly-Track, opposite and on axis to the SOCA connector, to properly suspend (Rig) the PCH-6.  On each side of the SOCA there are Fly-Track points as a safety to secure the SOCA cable.  For convenience, the center of the Power Cube Logo is colored red where the model number is, enabling the technical crew to quickly identify it is the High voltage wiring configuration (208-240V) version of the product.
This is probably the most compact and elegant piece
Power Cube® TH2 -- SKU # 23822 (SKU: SKU 23822)Power Cube®  TH2  --  SKU # 23822 (SKU: SKU  23822)TH2
PowerCon True1 splitter with an NAC3PX inlet/outlet connector parallel connected to a NAC3FPX outlet connector.  Includes a parallel connected green neon power indicator lamp.  On each side of the rugged aluminum extruded housing is an integrated Fly-Track rigging point to secure the box.  This is a basic passive 240V 16A Splitter.  Even though the box is rated for 240V it will also work on 120V.  The product is Electrically Approved by Special Inspection for the US
Power Cube® THX4 (SKU: 23824)Power Cube® THX4 (SKU: 23824)SPECIAL ORDER --  Power Cube® THX4 is a passive PowerCON TRUE1 (208-240 Volt A/C) Splitter device, containing no active components or supplementary circuit interrupter (breaker) devices inside.  The PowerCON TRUE1 connector series enables the user to disconnect the power cables while under load.  For public safety, The THX4 uses our proprietary custom aluminum extrusion body with built in integrated Fly-Track.  This makes it convenient to secure the box to lighting truss or speaker rigging with standard single stud rigging clips.  The supply inlet is a 20-Amp PowerCON TRUE 1 NAC3MPX connector that is parallel-connected with 12 Gauge wire to four (4) 20-Amp PowerCON TRUE 1 NAC3FPX outlets.  On one end of the extruded housing is the PowerCON TRUE 1 inlet with an NAC3FPX outlet on each side of the inlet power connector.  It also has a neon status indicator lamp, connected to the inlet connector.  On the opposite end of the extrusion are the rema
Power Cube® 4HX (SKU: 23724)Power Cube® 4HX (SKU: 23724)Power Cube® 4HX is a passive PowerCON (208-240 Volt A/C) Splitter device, containing no active components or supplementary circuit interrupter (breaker) devices inside.  For public safety, The 4HX uses our proprietary custom aluminum extrusion body with built in integrated Fly-Track.  This makes it convenient to secure the box to lighting truss or speaker rigging with standard single stud rigging clips.  The supply inlet is a 20-Amp PowerCON NAC3MPA-1 connector that is parallel-connected with 12 Gauge wire to four (4) 20-Amp PowerCON NAC3MPB-1 outlets.  On one end of the extruded housing is the PowerCON NAC3MPA-1 inlet with an NAC3MPB-1 outlet on each side of the inlet power connector.  It also has a neon status indicator lamp, connected to the inlet connector.  On the opposite end of the extrusion are the remaining two NAC3MPB-1 outlet connectors.  Maximum Dimensions: 139.7mm (5.5”) L X 139.4mm (5.488”) W X 53.4mm (2.1”) H.
NEW PowerCON TRUE1 POWER CUBE® TPCH-6 - Male SOCA to six NAC3FPX outlet connectors (SKU: 23920 -- 208V-240V)NEW PowerCON TRUE1 POWER CUBE® TPCH-6 - Male SOCA to six NAC3FPX outlet connectors (SKU: 23920 -- 208V-240V)SPECIAL ORDER -- This is the ULTIMATE SOCA break out device to 6 PowerCON TRUE 1 outlet connectors available!  Embedded into each side of the one piece solid aluminum extrusion, are three PowerCON TRUE 1 outlets, each connected to its own independent circuit on the SOCA style Connector.  As a safety feature there is a Fly-Track, opposite and on axis to the SOCA connector, to properly suspend the TPC-6 there are Fly-Track points to secure the SOCA cable.  This is the most rugged power distribution product with integrated rigging currently available for Speaker and Lighting applications.
Electrical Insulating Boot (SKU: 14342)Electrical Insulating Boot (SKU: 14342)This is an Electrical Insulating Boot (Sleeve) adapting our existing Power Cube® products to comply with the industry electrical standards for out-door stage use.
(Made for use with 4E, 4X, 4D and can be customized to work with the 4E+ and 4ES)
It isolates the metal enclosure from the stage deck and does not interfere with connection or disconnection to the box.  The sleeve is very snug to put on and must be stretched around the extrusion during application.  The Insulating Boot does cover the electrical approval stickers.  Therefore, if an inspector questions the device, you will have to remove it from the sleeve to reveal the approval stickers.  The material is UV protected so it won’t dis-color, shrink or crack if exposed to direct sunlight over several years.  This “Rubber Sleeve” has a cUL electrical rating that electrically insulates the Power Cube® extrusion up to 2,600 Volts.  This rating may app
The NEW PowerCON TRUE 1 POWER CUBE® TPC-6 - Male SOCA to six NAC3FPX outlet connectors (SKU: 22920 -- 120V-240V Version TPCH-6 use SKU 23920)The NEW PowerCON TRUE 1 POWER CUBE® TPC-6 - Male SOCA to six NAC3FPX outlet connectors (SKU: 22920 -- 120V-240V Version TPCH-6 use SKU  23920)SPECIAL ORDER -- Power Cube® TPC-6 is a passive Male SOCA to PowerCON TRUE1 (120 Volt Single Phase A/C -- 240V) Splitter device, containing no active components or supplementary circuit interrupter (breaker) devices inside.  The PowerCON TRUE1 connector series enables the user to disconnect the power cables while under load.  For public safety, The TX4 is built in our proprietary custom aluminum extrusion body with integrated Fly-Track.  This makes it convenient to secure the box to lighting truss or speaker rigging with standard single stud rigging clips.  The supply inlet is a 20-Amp 6 circuit SOCA connector that is connected with 12 Gauge wire to six (6) independent 20-Amp PowerCON TRUE 1 NAC3FPX outlets.  On one end of the extruded housing is the Male SOCA connector with 3 of the NAC3FPX outlets on each side of the extrusion body.  On the opposite end of the SOCA connector is a Fly-Track countersunk into the end of the extrusion body.  This al

Shopping Basket

Items: 0
Subtotal: $0.00
Note: All prices in US Dollars

Price Set

Click "Change" after Currency selection

Search by Keyword

DISTRO (SKU: 10042)DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s.  The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.
Home  ·  Cable Cube®  ·  About Us  ·  Contact Us  ·  Shipping  ·  Privacy Policy  ·  Links
Copyright © Gear Box Pro Ltd Cambridge, ON
sales@gearboxpro.com