The SLS-4 & 4D are a speaker cable splitter/combiner patch panels for portable and installation amplifier racks. The SLS-4 is essentially an SLS-2 with the connectors placed on the opposite sides or panels of the enclosure. Using Neutrik speaker cable jumpers, the amplifier outputs conveniently patch into the rear panel. The output or front panel then combines channels 1 & 2 into a single NL4 connector providing a Bi-amp output marked 1-2. This is repeated for channels A 3-4, B 1-2 and B 3-4. Each of these Bi-amp NL4 outputs are then combined together in their respective A & B groupings, into a single NL8 connector that can be used to feed an 8 conductor cable with an NL8FC connector allowing flexible patching of 4 full range or two Bi-amp NL4 output connectors in a stage box, by moving a single NL8 connection. The SLS-4D has a parallel connected NL8 that enables the user to patch a second Stage Box NL8FC cable connection into the same amplifier outputs connected to the box.
Submit a Review...
Click Add to Cart to order this product.
Email firstname.lastname@example.org any questions about this or any of our other products.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.