This is a 2U, 19" rack mount PowerCon® single phase Power Distribution Unit. All components are mounted on the front panel so the unit can be mounted behind other equipment in a rack and not have cables interfere or require access to the back of the unit. It uses a NEMA L15-30 inlet connector that feeds 6 20 Amp Switch Breakers, each of which are connected to a PowerCon® outlet on the front panel. On the front panel there is a convenience 20A Edison T-slot split duplex receptacle that is parallel connected to two of the PowerCon® outputs, circuit breakers # 1 & 4.
Submit a Review...
Click Add to Cart to order this product.
Email firstname.lastname@example.org any questions about this or any of our other products.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.