The SLP-231 is a 2U high 19" rack mount 220 Volt 30 amp single phase power distribution bar. This model has a NEMA L14-30 for a Main Inlet connector with a paralleled Outlet (pass through) connector for daisy connectivity of racks. There are two 20 Amp electrical circuit breakers on the front panel, each of which are connected to one of the two ( X & Y ) phases of the main power inlet connector. Each circuit breaker is connected to a pair of T-slot U-ground duplex receptacle outlets located on the rear panel. The same two independent circuit breakers distribute power from each phase of the inlet connector to each half of the split Tslot duplex convenience outlet on the front panel.
Submit a Review...
Click Add to Cart to order this product.
Email firstname.lastname@example.org any questions about this or any of our other products.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.