A/C is supplied to the Power Cube® 4ES through a 20-Amp PowerCON inlet connector, directly wired to a 20-Amp PowerCON outlet. This permits multiple Power Cubes® to be connected end to end on a single circuit. Both the inlet and outlet PowerCON connectors are recessed into the middle of the Fly-track on each side of the box. This places the receptacles at 90 degrees to the PowerCON inlet and outlet. On each of the open ends of the extruded housing is an Edison 15-amp Duplex Receptacle with its own dedicated 10-Amp supplementary circuit interrupter (Breaker) and power indicator lamp. Each duplex receptacle has a total maximum load of 8-Amps. All PowerCON inlets and outlets are parallel connected supporting a combined maximum electrical load of 12-16 Amps depending on the rating of the power supply cord connected.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.