SPECIAL ORDER -- Power Cube® THX4 is a passive PowerCON TRUE1 (208-240 Volt A/C) Splitter device, containing no active components or supplementary circuit interrupter (breaker) devices inside. The PowerCON TRUE1 connector series enables the user to disconnect the power cables while under load. For public safety, The THX4 uses our proprietary custom aluminum extrusion body with built in integrated Fly-Track. This makes it convenient to secure the box to lighting truss or speaker rigging with standard single stud rigging clips. The supply inlet is a 20-Amp PowerCON TRUE 1 NAC3MPX connector that is parallel-connected with 12 Gauge wire to four (4) 20-Amp PowerCON TRUE 1 NAC3FPX outlets. On one end of the extruded housing is the PowerCON TRUE 1 inlet with an NAC3FPX outlet on each side of the inlet power connector. It also has a neon status indicator lamp, connected to the inlet connector. On the opposite end of the extrusion are the remaining two NAC3FPX outlet connectors. Maximum Dimensions: 139.7mm (5.5”) L X 139.4mm (5.488”) W X 53.4mm (2.1”) H.
Submit a Review...
Click Add to Cart to order this product.
Email firstname.lastname@example.org any questions about this or any of our other products.
DISTRO (SKU: 10042)This is a break-out box that connects the first two contacts (pin 1+, 1-) of an NL4 connector to the first two contacts (pin 1+, 1-) of an NL4 and the other two contacts of the first NL4 connector (pin 2+, 2-) and connects them to the first two contacts (pin 1+, 1-) of a second NL4 connector.� ~ This has the same wiring as a COMBO that uses all NL2/Combo connectors. ~ Applications: This enables two (2) full range speakers to be connected to a single four (4) conductor speaker cable.
MATRIX (SKU: 10082)The MATRIX is an adaptor box that breaks out an NL8 into two (2) NL4’s. The first half of the NL8 connector (Pins 1+, 1-, 2+, 2-) connect to the same pins on the first NL4 connector. The second half of the NL8 (Pins 3+, 3-, 4+, 4-) connect respectively to Pin 1+, 1-, 2+, 2- of the second NL4.